Kelas Metode Numerik KKI 2022/2023

LIST OF NAMES

Picture	Name	NPM	Live Wikipage Competition Point	Youtube Page	Keterangan
	Tanwir Ahmad Farhan	2106665571	-	-	Asisten
	Illa Rizianiza	2106805565	-	-	Asisten
	Muhammad Hilman Gumelar Syafei	1906324126	-	-	Asisten
	Diyas Prawara	1906301173	-	-	Asisten
	Candra Damis Widiawaty	1806156191	-	-	Asisten
	Patrick Ray Samperuru	2106718306	-	https://www.youtube.com/@patsamps	Mahasiswa
	Vegantra Amayko Siaga	2106658811	-	https://youtube.com/@vegantraamayko8651	Mahasiswa
	M. Said Jiddan Walta	2106718256	-	https://youtube.com/@v_12_18_e	Mahasiswa
	Fadhlan Dindra	2106658414	-	https://www.youtube.com/@fadhlandindra8525	Mahasiswa
	Benarido Amri	2106718230	-	https://www.youtube.com/@BenAmri2023	Mahasiswa
	Muhammad Annawfal Rizky Sihotang	2106718281	-	https://www.youtube.com/@muhammadannawfalrizky1825	Mahasiswa
	Muhamad Azkhariandra Aryaputra	2106657765	-	https://www.youtube.com/@muhamadazkhariandraa4528	Mahasiswa
	Muhammad Ikhsan Rahadian	2106656882	-	https://www.youtube.com/@muhammadikhsanrahadian7010	Mahasiswa
	Ariq Dhifan	2106657323	-	https://www.youtube.com/@ariqdhifan1181	Mahasiswa
	Teuku Ahmad Faris Pasya	2106658603	-	https://www.youtube.com/watch?v=RuXxORUQgUs	Mahasiswa	-		M. Reyhan Fachriansyah Hermawan	2106657172	-	-	Mahasiswa

Class Discussion

30 May 2023

In todays class of Numerical Method, Pak DAI asked us to discuss the Hydrogen Tank Design and Optimization project within the class with every class member to gain better knowledge on developing our overall results. Throughout the class, the discussion was moderated by Patrick Samperuru as a replacement for the class coordinator, M. Jiddan Walta, who was at the time absent due to exchange matters. In this discussion, we started by making an outline on the project objective function which was to create a functional hydrogen tank design that is optimized following the constraint parameters of pressure at 8 bars, a capacity of 1 liter, and a maximum budget of 500,000 IDR. According to Benarido Amri, the ideal material for a high pressure cylinder has a very high tensile strength, a low density, and does not react with hydrogen or allow hydrogen to diffuse into it. Most pressure cylinders to date have used austenitic stainless steel. Patrick Samperuru then continued the discussion on the material by stating several potential materials that can be used based on the types of the hydrogen tanks, being type I of all metal, type II of metal with carbon fiber wrap, type III composite with metal lining, type IV composite with non-metal lining stating that type I and II is the most probable for the design. Next, M. Azkhariandra Aryaputra stated the importance of several design considerations such as storage tank design, safety measures, leakage mitigation, and material compatibility. Following the discussion of materials, Ariq Dhifan and Fadhlan Dindra added several materials that they want to use.

Next, we conversed the 3 main points needed in our optimization. This include the design variable, objective function, constraint which can be different for every class member. Patrick Samperuru started by explain that his objective function is to accommodate the use of hydrogen tanks in the field that is more complex and dynamic meaning it would need a constraint of a high strength and wear fatigue so that is can used for long term, which is achieved by choosing an all metal tank. For Vegantra Siaga, he wanted a pressure constraint because hydrogen storage systems often have pressure limits to ensure safe operation, where pressure constraints can be defined as upper and lower bounds on the hydrogen storage pressure that prevent the storage system from operating outside the desired pressure range. According to Faris Pasya, space and weight constraints can be used as well depending on the application, there may be limitations on the available space or weight of the pressurized hydrogen system. These constraints can influence the choice of tank size, material selection, and system layout. Next, M. Annawfal Rizky stated that he wants the constraint to be the compatibility with hydrogen, The tank material should be compatible with hydrogen gas to prevent any chemical reactions, embrittlement, or degradation that could affect the tank's performance or safety. Material selection is crucial to ensure compatibility and avoid hydrogen diffusion or leakage. For M. Ikhsan Rahadian, we chose safety due to the high pressure of hydrogen, and its highly flammable, the safety of the tank is very important. choosing the right material such as aluminum alloy 6061 can increase the strength and safety, and also choose the right design. I chose a tube shape with curved ends so that the pressure can be distributed evenly to minimize stress but still accommodate it optimally. M. Reyhan Fachriansyah stated that environmental factors, consider the operating environment, including temperature variations, exposure to moisture or chemicals, and potential impact or vibration.

Afterwards, Pak DAI stated that we need to discuss the next steps to take because the deadline for the project is next week on Tuesday, 6 June 2023. Thus, Patrick Samperuru began the discussion again regarding the points needed for completing the project which is first to find the constraints based on the objective function, then to conduct research on different materials and dimensions that could potentially be used, followed by finalizing the chosen design variables based on the constraints, and creating the code whether it is on Python or MATLAB to calculate the design following the constraints numerically.