Julian Jensen Purnomo

From ccitonlinewiki
Jump to: navigation, search

Introduction

Hello everyone! My name is Julian Jensen Purnomo, usually called Julian. My class is at Numerical Method 03 and my NPM is 2106732834

JulianJensenPurnomo.jpg

I am currently on a journey to study Numerical Method with concious learning, so that I can improve my conciousness and become a better human.

Design and Optimization of 1 Litre Pressurized Hydrogen (8 Bar) Storage

So today, I asked ChatGPT a few questions and this is what i can summarize and learn:

Hydrogen-Symbol.jpg

-What is Hydrogen? Hydrogen is a chemical element with the symbol H and atomic number 1. It is the lightest and most abundant element in the universe, making up about 75% of its elemental mass. Hydrogen is a colorless, odorless, and tasteless gas in its pure form.

Hydrogen is unique because it has only one proton and one electron, making it the simplest and smallest atom. It is located in the first group of the periodic table, known as the alkali metals, but it is often placed separately due to its unique properties.

In nature, hydrogen is commonly found in combination with other elements, such as oxygen in water (H2O) or carbon in hydrocarbons. It is also present in the atmosphere, although in relatively small amounts. Hydrogen can be extracted from these sources through various methods, such as electrolysis of water or steam methane reforming.

Hydrogen has a wide range of applications. It is used as a fuel for rockets and in the production of ammonia for fertilizers. It can be used as a clean energy carrier and fuel source for fuel cells, which convert hydrogen into electricity through a chemical reaction with oxygen. Hydrogen fuel cells are being explored as a potential alternative to fossil fuels in vehicles and power generation.

Lmphydrogencar.jpg

This is LMP (Lemans Prototype) Car is powered by Hydrogen.

-How can we Store Hydrogen? Hydrogen can be stored in different forms, depending on the intended application and storage duration. Here are some common methods of hydrogen storage:

Compressed Gas: Hydrogen gas can be stored under high pressure in specially designed tanks or cylinders. The gas is compressed to pressures ranging from 5,000 to 10,000 psi (pounds per square inch). Compressed gas storage is commonly used for short-term applications and in situations where a relatively small amount of hydrogen is needed.

Liquid Hydrogen: At extremely low temperatures below -252.87°C (-423.17°F), hydrogen can be converted into a liquid state. Liquid hydrogen has a higher energy density compared to compressed gas, allowing for more hydrogen to be stored in a given volume. It is stored in cryogenic tanks that are well-insulated to maintain the low temperatures required.

Liquid-hydrogen-storage-tank-system-horizontal-mounted-with-double-gasket-and-dual-seal.png

This is a liquid Hydrogen Storage Tank.

Metal Hydrides: Hydrogen can be stored in certain metals or alloys, forming compounds known as metal hydrides. These materials have the ability to absorb and release hydrogen. Metal hydrides offer a safe and compact storage option, particularly for stationary and portable applications. However, they may have limited storage capacity and can be relatively heavy.

Chemical Hydrides: Chemical hydrides are compounds that release hydrogen when they undergo a chemical reaction. They can store a high amount of hydrogen per unit weight, but the release and reabsorption of hydrogen often require specific conditions, such as heating or the use of catalysts.

Carbon-Based Materials: Hydrogen can be stored within certain carbon-based materials, such as activated carbon or carbon nanotubes. These materials have a high surface area and can adsorb hydrogen molecules, effectively storing them within their structure. Research is ongoing to develop efficient and cost-effective carbon-based storage systems.

Each storage method has its advantages and limitations, and the choice depends on factors like storage capacity, safety, cost, and application requirements. Developing efficient and practical hydrogen storage systems is an important area of research to facilitate the widespread adoption of hydrogen as an energy carrier.

Design Variables:

1. Container Material: The material used for the storage container, such as carbon fiber, metal alloy, or composite materials. 2. Container Shape: The shape of the storage container, which can affect its volume and overall dimensions. 3. Operating Pressure: The pressure at which the hydrogen is stored in the container. 4. Insulation: The type and thickness of insulation used to minimize heat transfer and maintain the desired temperature inside the container. 5. Safety Features: Various safety mechanisms and features incorporated into the design, such as pressure relief valves, burst discs, and leak detection systems.

Objective Function:

The objective function for a 1-liter hydrogen storage system can vary depending on the specific application. However, some possible objective functions could be: 1. Maximizing Hydrogen Storage Capacity: The objective could be to maximize the amount of hydrogen that can be stored within the given 1-liter volume. 2. Minimizing Weight: The objective could be to minimize the weight of the storage system, which is particularly important for portable applications. 3. Maximizing Safety: The objective could be to ensure the safety of the storage system by minimizing the risk of leaks, explosions, or other hazards. 4. Maximizing Energy Density: The objective could be to maximize the energy stored per unit volume, considering both the hydrogen storage capacity and the weight of the system.

Constraints:

1. Volume Constraint: The total volume of the storage system should not exceed 1 liter. 2. Pressure Constraint: The storage system should operate within a specified pressure range, taking into account safety factors and regulatory requirements. 3. Temperature Constraint: The temperature inside the storage system should be maintained within a certain range to prevent hydrogen leakage or degradation of the container material. 4. Material Strength Constraint: The container material should have sufficient strength to withstand the internal pressure and external stresses during operation. 5. Safety Constraint: The storage system should incorporate necessary safety features to prevent accidents or mitigate potential hazards associated with hydrogen storage. 6. Cost Constraint: The design should consider cost limitations and aim for an economically viable solution.

Note: The specific design variables, objective function, and constraints can vary based on the intended application, safety standards, and technological advancements at the time of development.

So, this is a python code for for calculating the design according to the constraints numerically.

Codingan hlmn1.PNG Codingan hlmn2.PNG