Difference between revisions of "Thermal Analysis of CPU Cooling System Based on Cascade Straight Heat Pipe - I Gusti Agung Ayu Desy Wulandari"
| Line 6: | Line 6: | ||
[[File:Cascadeheatpipe_initialthinking.mp4|480px|thumb|left|Source: Personal documentation]] | [[File:Cascadeheatpipe_initialthinking.mp4|480px|thumb|left|Source: Personal documentation]] | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
2. Modelling | 2. Modelling | ||
[[File:Cascadeheatpipe_modelling.mp4|480px|thumb|left|Source: Personal documentation]] | [[File:Cascadeheatpipe_modelling.mp4|480px|thumb|left|Source: Personal documentation]] | ||
Revision as of 02:46, 13 April 2020
Abstract
Central Processing Unit (CPU) technologies has led into smart technologies with a purpose to get a better performance followed by a smaller dimensions. However, it makes a significant increase in the heat flux produced by the CPU. In this research, cascade straight heat pipe was designed to get a better cooling performance and fully passive system. The methods used in this research were by giving the heat pipe some heat loads in amount of 10 W, 20 W, 30 W, and 40 W, respectively by analysis using simulation method on ANSYS software.
1. Initial Thinking
2. Modelling
