Difference between revisions of "TUGAS BESAR APLIKASI CFD: '''Two-Phase Simulation in Horizontal Flow Gas-Liquid Separator'''"

From ccitonlinewiki
Jump to: navigation, search
(Objectives)
(Objectives)
Line 7: Line 7:
  
 
1. Simulate CFD Analysis on Horizontal Separator using parameters based on the literature.
 
1. Simulate CFD Analysis on Horizontal Separator using parameters based on the literature.
 +
 
2. Investigate the most efficient separator within a certain distance from the inlet and various inlet velocities.
 
2. Investigate the most efficient separator within a certain distance from the inlet and various inlet velocities.
 +
 
3. Verify the correct mesh using a grid-independent study to acquire the best simulation and minimum error result.
 
3. Verify the correct mesh using a grid-independent study to acquire the best simulation and minimum error result.
 +
 
4. Validate the simulation based on the previous researches to obtain the deviation between measures.
 
4. Validate the simulation based on the previous researches to obtain the deviation between measures.
  

Revision as of 15:56, 3 December 2020

Introduction

Petroleum reaches the surface as a mixture consisting of gas and fluid substance. To achieve an adequate quality of petroleum, one needs to satisfy the process of a petroleum refinery, which requires deliberation in multiphase separation. A gas-liquid separator was designed to separate two different substances using a diverter inside the system. To acquire efficient separation, one needs to consider the effective diverter near the system's inlet. This consideration requires a perilous investigation, which numerical modeling would be utilized in achieving the low cost and minimum risk investigation upon the system.

Objectives

1. Simulate CFD Analysis on Horizontal Separator using parameters based on the literature.

2. Investigate the most efficient separator within a certain distance from the inlet and various inlet velocities.

3. Verify the correct mesh using a grid-independent study to acquire the best simulation and minimum error result.

4. Validate the simulation based on the previous researches to obtain the deviation between measures.

Methodology

Results

Conclusions

References

[1] Yayla, Sedat & Kamal, Karwan & Bayraktar, Seyfettin & Oruç, Mehmet. (2017). TWO PHASE FLOW SEPARATION IN A HORIZONTAL SEPARATOR BY INLET DIVERTER PLATE IN OILFIELD INDUSTRIES.