Difference between revisions of "Muhammad Ryan Rafi'uddin"

From ccitonlinewiki
Jump to: navigation, search
(Individual Project)
Line 30: Line 30:
  
 
The following experiment is conducted by Jonas Suhardi on Honda CR-V engine with i-VTEC.
 
The following experiment is conducted by Jonas Suhardi on Honda CR-V engine with i-VTEC.
[[File:torquevvt.jpg|200px]]
+
 
 +
[[File:torquevvt.jpg|800px]]
  
 
With an active i-VTEC engine, the peak torque produced is 211.7 Nm at 4900 RPM while for a non-active i-VTEC is 202.8 5350 Rpm. The torques produced by an active i-vtec system are greater than those produced by a non-active i-vtec system on both low and high rotation. The mean average value of torque produced by active i-VTEC system is 200.03, while for non-active i-VTEC system is 192.69. Torque produced by an active i-VTEC system is 3.67% higher than non-active i-VTEC engine.  
 
With an active i-VTEC engine, the peak torque produced is 211.7 Nm at 4900 RPM while for a non-active i-VTEC is 202.8 5350 Rpm. The torques produced by an active i-vtec system are greater than those produced by a non-active i-vtec system on both low and high rotation. The mean average value of torque produced by active i-VTEC system is 200.03, while for non-active i-VTEC system is 192.69. Torque produced by an active i-VTEC system is 3.67% higher than non-active i-VTEC engine.  

Revision as of 12:12, 3 March 2023

Introduction

My name is Muhammad Ryan Rafi'uddin with student number 2006488133 currently majoring in Mechanical Engineering.

Relation Between Industries

Below is my short conversation regarding the relation between sugar cane factory, automotive factory and oil and gas company with chatGPT

Connection between energy industries

Ryan: what is the relation between sugar cane factory, automotive factory and oil and gas company?

ChatGPT: At first glance, there may not seem to be a direct relationship between a sugar cane factory, an automotive factory, and an oil and gas company, as they are all in different industries. However, there are some potential connections between them:

Energy usage: All three industries are heavy users of energy. A sugar cane factory requires energy to power the machinery that processes the cane into sugar or ethanol. An automotive factory requires energy to power the assembly line and machinery used to manufacture cars. An oil and gas company requires energy to extract, refine, and transport oil and gas. In each case, the companies may be interested in finding ways to reduce their energy consumption or transition to more sustainable energy sources.

Transportation: Both the automotive and oil and gas industries are heavily involved in transportation. The automotive industry manufactures cars and trucks that run on gasoline or diesel fuel, which is produced by the oil and gas industry. Additionally, both industries rely on transportation infrastructure to move goods and people from one place to another.

Co-products: Sugar cane factories and oil and gas companies may have a connection through the production of ethanol. Sugar cane can be processed into ethanol, which is used as a biofuel in some areas. Oil and gas companies may also produce ethanol as a co-product during the refining of crude oil.

Overall, while these industries may not have a direct relationship, there are potential connections between them through their use of energy, transportation needs, and production of co-products.

Individual Project

For this class's individual project, I would like to choose IC engine as the topic of the individual project. I would like to do research regarding the effect of different types of variable valve timing on the engine's efficiency and performance.

Introduction

In order for the Internal Combustion engine to work properly, the camshaft needs to open the intake and exhaust valves at a specific set of time so that the fuel and air can be drawn in and the burnt fuel can get out at the proper time. The precise timing of the closing and the opening of the valves corresponds to the engine’s position is known as valve timing. An engine needs to draw in more air-fuel mixture to produce more power when the engine runs at high speed, thus, the inlet valves need to be opened earlier and for a longer time. In older, more conventional engines, the period when the valves are open was optimized only for a single speed. Thus, when the engine speed increases the engine suffers from a deficiency due to power loss. Variable valve timing is developed to overcome such deficiency by diversifying the timing of the intake and exhaust valves opening for various engine speeds.

Studies and Findings

The following experiment is conducted by Jonas Suhardi on Honda CR-V engine with i-VTEC.

Torquevvt.jpg

With an active i-VTEC engine, the peak torque produced is 211.7 Nm at 4900 RPM while for a non-active i-VTEC is 202.8 5350 Rpm. The torques produced by an active i-vtec system are greater than those produced by a non-active i-vtec system on both low and high rotation. The mean average value of torque produced by active i-VTEC system is 200.03, while for non-active i-VTEC system is 192.69. Torque produced by an active i-VTEC system is 3.67% higher than non-active i-VTEC engine. Powervvt.jpg With the active i-VTEC system the highest power generated is 181.5 HP at 6910 RPM, while for the non active i-VTEC system is 167.7 HP at 7020 RPM. The power generated by the active i-VTEC system is greater than those generated by the non active i-VTEC system on both low and high RPMs. The mean average value of power generated by the active i-VTEC system is 118.85 HP, while for the non active i-VTEC system is 107.75 HP. Power generated by the active i-VTEC system is 9.33% higher than the non active i-VTEC system.

From experiments above, it can be concluded that engines with VVT systems produce more torque and power than engines with non-active VVT system, even though the change is not that significant.

Internal Combustion Engine Simulation

ICEmodelingryan2.jpg

Today's class topic is about learning how to create a simulation of an ICE engine using OpenModelica. Below is my understanding regarding today's topic: The first step is to install ThermoSysPro to OpenModelica by importing the ThermoSysPro library to OpenModelica. The next step is to create a new OM class and then drag the IC engine from the ThermoSysPro library into the new OM class. Drag FuelSourcePQ from the library and connect it to the gas of IC engine to simulate the fuel. Drag one SourcePQ for flue gases to the model and add another type of SourcePQ for water/steam. Add one Sink to the outlet part of IC engine for flue gases and add another type of Sink for water/steam. The last step is to input the variables into the parameters.