Dzakiyya Yumna Fitrasani

Introduction

Hello, my name is Dzakiyya. I am a student in Metode Numerik-01. This will be my page regarding Metode Numerik.

FULLNAME: Dzakiyya Yumna Fitrasani

STUDENT NUMBER: 2106728055

Numerical Methods in Mechanical Engineering / 22 May 2023

Numerical methods are extensively used in various areas of mechanical engineering to solve complex mathematical equations, simulate physical phenomena, and optimize designs. Here are some key applications of numerical methods in mechanical engineering:

1. Solving Equations: Numerical methods such as root-finding algorithms (e.g., Newton-Raphson method) and numerical integration techniques (e.g., Simpson's rule, trapezoidal rule) are used to solve equations encountered in mechanical engineering, such as finding the roots of nonlinear equations or evaluating integrals in engineering analysis.

2. Finite Element Analysis (FEA): FEA is widely used in mechanical engineering for structural analysis. It involves dividing a complex structure into smaller finite elements and solving the equations of equilibrium numerically. FEA helps in determining stress, strain, deformation, and failure criteria in mechanical components and systems. It is used in the design and optimization of structures, such as buildings, bridges, and machine components.

3. Computational Fluid Dynamics (CFD): CFD is employed to analyze fluid flow and heat transfer in mechanical systems. Numerical methods, such as finite volume or finite element methods, are used to discretize the fluid domain and solve the governing equations (e.g., Navier-Stokes equations). CFD is applied in the design of aerodynamic profiles, HVAC systems, combustion chambers, and optimization of fluid flow in pipes and channels.

4. Optimization and Design: Numerical optimization techniques, such as genetic algorithms, gradient-based methods, and response surface methods, are employed to optimize designs in mechanical engineering. These methods help in finding optimal solutions for parameters like shape, size, material selection, and operating conditions, considering constraints and objective functions.

These are just a few examples of how numerical methods are applied in mechanical engineering. These methods enable engineers to solve complex problems, make informed design decisions, optimize performance, and reduce the need for costly physical experiments.

Hydrogen Storage Design, Optimization, and Calculation

A. Hydrogen Storage Technologies

Storing hydrogen in gaseous form requires two main components – a storage compartment and a compressor to achieve higher storage pressure and increase the storage density. Gaseous hydrogen is usually not stored in pressure exceeding 100 bar in vessels above ground and 200 bar for underground storage (Wolf, 2015). The low density of hydrogen leads to the requirement of large storage volumes, and as a consequence, usually large investment costs. However, higher pressure e.g. 700 bar requires advanced vessel materials such as carbon fiber, which makes it very expensive and not considered viable for large-scale applications (Andersson & Grönkvist, 2019). One of the main advantages of storing hydrogen as compressed gas compared to liquid hydrogen is that most applications for hydrogen today require hydrogen in gaseous form.

Fig. 1 – Components of a pressurized hydrogen storage tank.

B. Aspects to be considered in designing hydrogen storage

When designing hydrogen storage systems, several aspects need to be considered to ensure safety, efficiency, and practicality. Here are some key factors to take into account:

1. Material Compatibility: Hydrogen can interact with various materials, leading to embrittlement or leakage. It is essential to select materials that are compatible with hydrogen and can withstand the operating conditions of the storage system. This includes considering factors such as material strength, corrosion resistance, and permeability to hydrogen.

2. Cost: The cost of the storage system plays a significant role in its viability. Design considerations should focus on optimizing cost-effectiveness while meeting the required storage capacity and safety standards.

3. Safety: Hydrogen is highly flammable and has a wide flammability range, so safety is of utmost importance. Storage systems must be designed to minimize the risk of leaks, explosions, and other hazards. Safety measures may include using robust materials, incorporating pressure relief devices, implementing proper ventilation, and ensuring effective leak detection systems.

4. Efficiency: The storage system should minimize energy losses during storage and retrieval processes. Any energy required for compression should be considered. Additionally, the system should minimize energy losses due to heat transfer or leakage.

5. Regulations and Standards: Compliance with relevant regulations, codes, and standards is crucial to ensure safety and performance. Design considerations should align with existing guidelines or actively contribute to the development of new standards as the hydrogen industry evolves.

C. Demands

Capacity: 1 liter

Pressure: 8 bar = 116 psi

Maximum budget: 500,000 IDR

D. Hydrogen storage design and optimization based on demands

Material: Polymer liner and a composite wrapping

Table 1 – Experimental mechanical properties of polymer blend liner. (E.S. Barboza Neto et al., 2011).

Fig. 2 – Schematic of the prototype (a) and the actual (b) liners (E.S. Barboza Neto et al., 2011).

Two types of liners have been produced by rotational molding using the same LLDPE/HDPE blend, the Ø72 x 270 mm (diameter length) prototype liner with an inner volume of 1 L and the actual-scale liner (Ø224 x 725 mm), with an inner volume of 22 L. Fig. 2 shows schematic drawings of both liners.

The fiber-resin composite, with 60% fiber by volume, has a manufactured-listed tensile strength of 2550 MPa.

Fig. 3 – Schematic of compressed hydrogen storage tank (Roh et al., 2013).

A fiber winding angle of 15 was used for the helical layers, while angles close to 90 were used for the hoop layers. To help squeeze out excessive resin during the winding process, the helical and hoop layers were wound alternately over the liner.

E. Analysis

Composite Wrapping Analysis

• Netting analysis

Netting analysis is a preliminary sizing step to estimate the thicknesses of the helical and hoop layers for given pressure load, safety factor, and composite strength.

• Hoop winding angle

The helical and hoop thicknesses are 18.5 mm and 19.6 mm, respectively. The total composite weight of the tank is 107.4 kg.

• L/D ratio

Tanks that fit within the available space onboard a vehicle typically have length-to-diameter ratio between ~1.5 and ~4.0. The results of the analysis showed only a small difference in the amount of composite needed, 103.6 kg for L/D of 1.5 versus 102.0 kg for L/D of 3.0.

Table 2 – Geometry and weight of the composite for different models (Roh et al., 2013).

F. Stress Analysis Coding

import math import numpy as np import matplotlib.pyplot as plt

sig_x = 34.5 sig_y = 70 tau_xy = 43.2 theta_d = 30 theta = theta_d*math.pi/180

1. Stresses on an element orientated at theta degrees

sig_x1 = 0.5*(sig_x+sig_y) + 0.5*(sig_x-sig_y)*np.cos(2*theta) + tau_xy*np.sin(2*theta) sig_y1 = 0.5*(sig_x+sig_y) - 0.5*(sig_x-sig_y)*np.cos(2*theta) - tau_xy*np.sin(2*theta) tau_x1y1 = -0.5*(sig_x-sig_y)*np.sin(2*theta) + tau_xy*(np.cos(2*theta))

print('(i) Stresses on an element orientated at {one} theta degrees'.format(one=theta_d)) print('— sig_x1 = {one} N/mm^2'.format(one=round(sig_x1,1))) print('— sig_y1 = {one} N/mm^2'.format(one=round(sig_y1,1))) print('— tau_x1y1 = {one} N/mm^2'.format(one=round(tau_x1y1,1)))

1. Principal planes

theta_1 = 0.5*math.atan((2*tau_xy)/(sig_x-sig_y)) theta_2 = theta_1 + (math.pi/2) theta_1d = theta_1*(180/math.pi) theta_2d = theta_2*(180/math.pi)

print('\n') print('(ii) Principal angles') print('— The principal angles are {one} and {two} degrees'.format(one=round(theta_1d,1),two=round(theta_2d,1)))

1. Principal stresses

sig_1 = 0.5*(sig_x+sig_y) + 0.5*(sig_x-sig_y)*np.cos(2*theta_1) + tau_xy*np.sin(2*theta_1) sig_2 = 0.5*(sig_x+sig_y) + 0.5*(sig_x-sig_y)*np.cos(2*theta_2) + tau_xy*np.sin(2*theta_2) print('\n') print('(iii) Principal stresses') print('— The principal stresses are {one} N/mm^2 occurs on a plane orientatated at {two} degrees'.format(one=round(sig_1,1), two=round(theta_1d,1))) print('— The principal stresses are {one} N/mm^2 occurs on a plane orientatated at {two} degrees'.format(one=round(sig_2,1), two=round(theta_2d,1)))

if(sig_1>sig_2):

 print('— sig_1 is {one} N/mm^2 and theta_p1 is {two} degrees'.format(one=round(sig_1,1),two=round(theta_1d)))
 print('— sig_2 is {one} N/mm^2 and theta_p2 is {two} degrees'.format(one=round(sig_2,1),two=round(theta_2d)))

else:

 print('— sig_1 is {one} N/mm^2 and theta_p1 is {two} degrees'.format(one=round(sig_2,1),two=round(theta_2d)))
 print('— sig_2 is {one} N/mm^2 and theta_p2 is {two} degrees'.format(one=round(sig_1,1),two=round(theta_1d)))

1. Planes of max +ve/-ve shear stress

if(sig_1>sig_2):

 theta_s1 = theta_1d-45 # Plane for maximum positive shear stress

else:

 theta_s1 = theta_2d-45 # Plane for maximum positive shear stress

theta_s2 = theta_s1+90 # Plane of maximum negative shear stress

print('\n') print('(iv) Planes of max +ve/-ve shear stress') print('— Max +ve shear stress occurs on a plane at {one} degrees'.format(one=round(theta_s1,1))) print('— Max -ve shear stress occurs on a plane at {one} degrees'.format(one=round(theta_s2,1)))

1. Maximum shear stress

tau_max = abs(0.5*(sig_2-sig_1)) sig_s = 0.5*(sig_x+sig_y) print('\n') print('(v) Maximum shear stress') print('— The maximum shear stress has a magnitude of {one} N/mm^2'.format(one=round(tau_max,1))) print('— The normal stress on the max shear stress planes is {one} N/mm^2'.format(one=round(sig_s,1)))

1. Plotting

Theta = np.arange(-180,181) #(degrees) Range of angles in degrees Theta_rad = math.pi/180*Theta #(radians) Convert angles to radians

1. Transformation equations

Sig_x1 = 0.5*(sig_x+sig_y) + 0.5*(sig_x-sig_y)*np.cos(2*Theta_rad) + tau_xy*np.sin(2*Theta_rad) Sig_y1 = 0.5*(sig_x+sig_y) - 0.5*(sig_x-sig_y)*np.cos(2*Theta_rad) - tau_xy*np.sin(2*Theta_rad) Tau_x1y1 = -0.5*(sig_x-sig_y)*np.sin(2*Theta_rad) + tau_xy*(np.cos(2*Theta_rad))

fig = plt.figure() axes = fig.add_axes([0.1,0.1,2,1])

1. Plot transformation equations

axes.plot(Theta,Sig_x1,'royalblue',label="Normal Stress, $\sigma_x$") axes.plot(Theta,Sig_y1,'seagreen',label="Normal Stress, $\sigma_y$") axes.plot(Theta,Tau_x1y1,'lightcoral',label="Shear Stress, $t\_{x1y1}$")

1. Plot stresses at 30 degrees

axes.plot([theta_d,theta_d],[sig_x1,sig_y1],'r',linestyle='--',lw=2) # Vertical guide line at 30 degrees axes.plot([theta_d],[sig_x1],'o',color='lime',markersize=5) # Stress sig_x1 axes.plot([theta_d],[sig_y1],'o',color='lime',markersize=5) # Stress sig_y1 axes.plot([theta_d],[tau_x1y1],'o',color='lime',markersize=5) # Shear tau_x1y1

1. Housekeeping

axes.set_xlabel('Angle of face (degrees)') axes.set_ylabel('Stress $(N/mm^2)$') axes.set_title('Stress variation with angle') axes.set_xlim([-180,180]) axes.set_xticks(np.arange(-180,180,20)) axes.legend(loc='lower left') print('\n') print('(vi) Plotting') plt.grid() plt.show()

(i) Stresses on an element orientated at 30 theta degrees — sig_x1 = 80.8 N/mm^2 — sig_y1 = 23.7 N/mm^2 — tau_x1y1 = 37.0 N/mm^2

(ii) Principal angles — The principal angles are -33.8 and 56.2 degrees

(iii) Principal stresses — The principal stresses are 5.5 N/mm^2 occurs on a plane orientatated at -33.8 degrees — The principal stresses are 99.0 N/mm^2 occurs on a plane orientatated at 56.2 degrees — sig_1 is 99.0 N/mm^2 and theta_p1 is 56 degrees — sig_2 is 5.5 N/mm^2 and theta_p2 is -34 degrees

(iv) Planes of max +ve/-ve shear stress — Max +ve shear stress occurs on a plane at 11.2 degrees — Max -ve shear stress occurs on a plane at 101.2 degrees

(v) Maximum shear stress — The maximum shear stress has a magnitude of 46.7 N/mm^2 — The normal stress on the max shear stress planes is 52.2 N/mm^2

(vi) Plotting

Fig. 4 – Stress variation with angle.

G. References

Roh, H. S., Hua, T. Q., & Ahluwalia, R. K. (2013). Optimization of carbon fiber usage in Type 4 hydrogen storage tanks for fuel cell automobiles. International Journal of Hydrogen Energy, 38(29), 12795–12802. https://doi.org/10.1016/j.ijhydene.2013.07.016

SAE TIR J2579Technical information report for fuel systems in fuel cell and other hydrogen vehicles. USA: Society of Automotive Engineers; 2008.