Difference between revisions of "Muhammad Alvito Bintang Safero"

From ccitonlinewiki
Jump to: navigation, search
(Design and Optimization of 1-Litre Pressurized Hydrogen Storage with 8 Bar Pressure Capability)
(Design and Optimization of 1-Litre Pressurized Hydrogen Storage with 8 Bar Pressure Capability)
Line 153: Line 153:
  
 
Final T Circumferential  = 0.0514 inch
 
Final T Circumferential  = 0.0514 inch
 +
 
Final T Longitudinal      = 0.0452 inch
 
Final T Longitudinal      = 0.0452 inch
  
Line 158: Line 159:
  
 
So, for the storage of hydrogen of 1 Liter I used the calculation of:
 
So, for the storage of hydrogen of 1 Liter I used the calculation of:
 +
 
Radius 5.42 + 0.131 = 5.551 cm   
 
Radius 5.42 + 0.131 = 5.551 cm   
 +
 
Height 10.84 + 0.131 = 10.971 cm  
 
Height 10.84 + 0.131 = 10.971 cm  
V = 3.14 x 5.551 x 5.551 x 10.971 = 1,061.496 cm^3.
+
 
 +
'''V = 3.14 x 5.551 x 5.551 x 10.971 = 1,061.496 cm^3.'''
  
 
[[Hydrogen Storage]]
 
[[Hydrogen Storage]]

Revision as of 23:08, 10 June 2023

Consciousness

To get more concious learning, do try to think the realistic solution and its reasoning to the following case : what will be (X^2 -1) /(X-1) if X = 1

If we subtitute X = 1 in the equation (X^2 -1) /(X-1). This will result in 0/0 meaning undefined. Why so? Division is a mathematical operation that divides a number with another number to produce a certain value. To prove whether 0/0 is undefined. We can use the “Reductio Ad Absurdum” technique. The essence of “Reductio Ad Absurdum” reasoning is to prove that the proposition “P” is correct by taking the first step to consider the negation p, which is “~p”, to be the correct proposition. The second step deduces a contradiction based on the assumption that “~p” is true. Since the assumptions that have been established produce contradictions and contradiction are irrational, then the probability “~p” is true is rejected and it is concluded that p is true.

First assuming 0/0 is defined by producing a certain value. For a and b € R. 0/0 = a -> 0 = 0 x a (correct). 0/0 = b -> 0 = 0 x b (correct). Because a 0/0 division produces an unspecified and uncertain value and this contradicts the statement that 0/0 is defined by producing a certain certain value. Therefore, the assumption 0/0 defined is denegated to be 0/0 undefined.

We need to find answers by other methods. As a factoring method. (X^2 -1) /(X-1) = (X+1) (X-1)/(X-1). Then we can eliminate (X-1) and leave (X+1). Subtitute X = 1 to X + 1. The answer is 2.


Is Consciousness relevant to the previous case ? Do narate it ! why is that so?

In my opinion, consciousness arises from the complex computational processes that occur in the brain, which can be explained and understood through mathematical models. According to this perspective, brain nerve networks and their interactions can be explained mathematically, and consciousness is the emerging property of these computational processes.

However, it is important to note that mathematics, as a formal system, is not synonymous with consciousness itself. While mathematical models can help us understand and describe certain aspects of cognitive processes, they do not fully capture the subjective nature of conscious experience.

In short, while mathematics can be a valuable tool to understand and model certain aspects of brain function, it does not provide a complete explanation for consciousness.


Hydrogen Fuel

Hydrogen fuel is a non-emission fuel used as a fuel for power generation along with oxygen using a unit called hydrogen fuel cell. Hydrogen Fuel Cell works similarly to a battery, where a fuel cell has anode (-) and cathode (+) poles. Hydrogen (H2) is transferred to the anode pole which will subsequently break the hydrogen molecule into electrons and hydrogen ions. The flow of electrons on the external circuit will produce electricity. Meanwhile, hydrogen ions will react with oxygen (O2) which will produce water vapor. (H2O). The by-product of this reaction is only water vapor, so hydrogen fuel is a very clean type of energy. There are several methods for producing hydrogen as fuel. Currently, the most commonly used method is steam reforming using natural gas. In addition, there are several other methods such as gasification, electrolysis, as well as biological processes.

Steam Reformation In this process, the methane contained in natural gas is extracted and reacted with steam to produce hydrogen. About 95% of the hydrogen available on the market is produced by this process.


Gasification In the process of gasification, coal or biomass materials are reacted with oxygen and steam to produce gas synthesis. Subsequently, hydrogen molecules are separated from gas synthesis using a separation system.


Electrolysis The process of electrolysis uses a tool called an electrolyzer. The main concept of this process is the separation of hydrogen molecules as well as oxygen from water by reactions caused by electric flow.


The biological process Microbes such as bacteria and microalgae can produce hydrogen by biological reactions using sunlight or organic matter. The technology is still in the research and development phase.

Screenshot 2023-05-29 013444.png


Design and Optimization of 1-Litre Pressurized Hydrogen Storage with 8 Bar Pressure Capability

Due to the ever-increasing stringency of environmental policy requirements, hydrogen fuel cell vehicles (HFCVs), which are intended to serve as a substitute for conventional automobiles, are continuously evolving as a new promising technology. It is essential to conduct hazard identification as an early phase in the development of HFCVs in order to describe possible hazards and identify potential safety concerns. The onboard hydrogen storage and supply system is an essential component of HFCVs, serving to store hydrogen and provide it to the fuel cell system to guarantee its proper functioning. Designing a 1-litre pressurized hydrogen storage system with the ability to hold a pressure of 8 bars within a budget of 500,000 Indonesian Rupiah (IDR) presents a challenge. In this essay, we will explore the considerations and possibilities of designing an efficient and cost-effective hydrogen storage system that meets the pressure requirement while staying within the given budget constraints.

Material Selection:

In order to build this hydrogen storage, the material I choose is ASTM A36 sheet metal with yield strength of 36,000 psi and allowable stress value = 2/3 x Sy = 24.000 psi .


Tank Design:

To optimize a tube with a volume of 1 liter (1000 cm3), we can look for a combination of radius and height that produces the smallest surface area. In this case, we will use an optimization algorithm approach to find the best solution. Here are examples of coding using Python and the scipy optimization module: import math from scipy.optimize import minimize

def objective(x):

   # x[0] = radius, x[1] = height
   r = x[0]
   h = x[1]
   surface_area = 2 * math.pi * r * (r + h)
   return surface_area

def constraint(x):

   # x[0] = radius, x[1] = height
   r = x[0]
   h = x[1]
   volume = math.pi * r**2 * h
   return volume - 1000  # Constraint: Volume = 1000 cm³
  1. Inisialisasi nilai awal

x0 = [1, 1]

  1. Mendefinisikan batasan

volume_constraint = {'type': 'eq', 'fun': constraint}

  1. Menyelesaikan optimisasi dengan batasan

result = minimize(objective, x0, constraints=volume_constraint)

  1. Mendapatkan jari-jari dan tinggi teroptimasi

radius = result.x[0] height = result.x[1]

  1. Menghitung luas permukaan teroptimasi

min_surface_area = objective(result.x)

  1. Menampilkan hasil

print("Jari-jari teroptimasi:", radius) print("Tinggi teroptimasi:", height) print("Luas permukaan teroptimasi:", min_surface_area)

Jari-jari teroptimasi: 5.41926305506462

Tinggi teroptimasi: 10.838511985088449

Luas permukaan teroptimasi: 553.5810444905989

In the example above, we use the minimize function of the scipy module to solve optimization problems with limitations. The objective function is the object function that seeks the area of the surface, while the constraint function is a volume limit. We give the initial value x0 for fingers and heights, and the optimization results are stored in the result variable. As a result, we can obtain optimized radius, optimized heights, and optimized surface areas that are then displayed.


Thickness formula for longitudinal stress direction :

print ("with reference to some data that we have obtained, we can determine the minimum\nthickness of the vessel, with the following data :\n ") print ("the value of E  : 0.85 ") print ("the value of P (psi)  : 116 psi") print ("the value of R (inch)  : 2.133568131915205335 inch ") print ("the value of S (psi)  : 24000 psi ") print ("the value of corrosion allowance (inch) : 0.039 inch \n")

E = 0.85 P = 116 R = 2.133568131915205335 S = 24000 corrosion_allowance = 0.039

  1. Calculate t circumferential

t_circumferential = P * (R + corrosion_allowance) / ((S * E) - (E * P)) final_t_circumferential = t_circumferential + corrosion_allowance

  1. Calculate t longitudinal

t_longitudinal = P * (R + corrosion_allowance) / ((2 * S * E) + (0.4 * P)) final_t_longitudinal = t_longitudinal + corrosion_allowance

if final_t_circumferential > final_t_longitudinal:

   minimum_thickness = final_t_circumferential

else:

   minimum_thickness = final_t_longitudinal

print ("then the following results were found : \n")

print(f"Final T Circumferential = {final_t_circumferential:.4f} inch") print(f"Final T Longitudinal = {final_t_longitudinal:.4f} inch\n") print(f"Hence, minimum thickness is {minimum_thickness:.4f} inch\n")

the value of E  : 0.85

the value of P (psi)  : 116 psi

the value of R (inch)  : 2.133568131915205335 inch

the value of S (psi)  : 24000 psi

the value of corrosion allowance (inch) : 0.039 inch


then the following results were found :

Final T Circumferential = 0.0514 inch

Final T Longitudinal = 0.0452 inch

Hence, minimum thickness is 0.0514 inch or 0,131 cm

So, for the storage of hydrogen of 1 Liter I used the calculation of:

Radius 5.42 + 0.131 = 5.551 cm

Height 10.84 + 0.131 = 10.971 cm

V = 3.14 x 5.551 x 5.551 x 10.971 = 1,061.496 cm^3.

Hydrogen Storage

Screenshot 2023-06-05 023106.png

Von Mises Stress

Screenshot 2023-06-05 043012.png

Safety Factor

Screenshot 2023-06-05 043343.png