Difference between revisions of "Lontar fiber composite: Case study of stress concentration factor simulation at open hole tensile specimen - Ardy Lololau"
Ardy.lefran (talk | contribs) (Created page with "===Abstract=== In the present study, research has been planned to investigate the stress concentration factor of open hole tensile specimens of lontar fiber-reinforced compos...") |
Ardy.lefran (talk | contribs) |
||
| Line 2: | Line 2: | ||
In the present study, research has been planned to investigate the stress concentration factor of open hole tensile specimens of lontar fiber-reinforced composites on simulation-based work. To do so, a predecessor works of tests were conducted to establish the tensile strength of an open hole of lontar fiber-reinforced composites. The lontar fiber composite specimen was rectangular type based on American Society for Testing and Materials (ASTM) D5766 and has been designed using ANSYS SpaceClaim 2019 R2. CAD software. The designed open hole tensile specimen then to be meshed and simulated using ANSYS Mechanical 2019 R3 using data obtained from predecessor works to gain the stress spread. | In the present study, research has been planned to investigate the stress concentration factor of open hole tensile specimens of lontar fiber-reinforced composites on simulation-based work. To do so, a predecessor works of tests were conducted to establish the tensile strength of an open hole of lontar fiber-reinforced composites. The lontar fiber composite specimen was rectangular type based on American Society for Testing and Materials (ASTM) D5766 and has been designed using ANSYS SpaceClaim 2019 R2. CAD software. The designed open hole tensile specimen then to be meshed and simulated using ANSYS Mechanical 2019 R3 using data obtained from predecessor works to gain the stress spread. | ||
| + | |||
| + | ===Presentation video=== | ||
| + | |||
| + | ====Preface==== | ||
| + | |||
| + | [[File:Ardy_preface.mp4]] | ||
| + | |||
| + | ====Initial thinking==== | ||
| + | |||
| + | [[File:Ardy_Intial_thinking.mp4]] | ||
| + | |||
| + | ====Modelling==== | ||
| + | |||
| + | [[File:Ardy_modelling.mp4]] | ||
| + | |||
| + | ====Simulation==== | ||
| + | |||
| + | [[File:Ardy_simulation.mp4]] | ||
| + | |||
| + | ====Verification==== | ||
| + | |||
| + | [[File:Ardy_verification.mp4]] | ||
| + | |||
| + | ====Validation==== | ||
| + | |||
| + | [[File:Ardy_validation.mp4]] | ||
Latest revision as of 04:13, 13 April 2020
Contents
Abstract
In the present study, research has been planned to investigate the stress concentration factor of open hole tensile specimens of lontar fiber-reinforced composites on simulation-based work. To do so, a predecessor works of tests were conducted to establish the tensile strength of an open hole of lontar fiber-reinforced composites. The lontar fiber composite specimen was rectangular type based on American Society for Testing and Materials (ASTM) D5766 and has been designed using ANSYS SpaceClaim 2019 R2. CAD software. The designed open hole tensile specimen then to be meshed and simulated using ANSYS Mechanical 2019 R3 using data obtained from predecessor works to gain the stress spread.
Presentation video
Preface
Initial thinking
Modelling
Simulation
Verification
Validation
