Difference between revisions of "Ramadhan Bagus Alfarizky"

From ccitonlinewiki
Jump to: navigation, search
(Building Hydrogen Tanks)
(Hydrogen Tank Design and Optimization Project)
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
  
Hello my name is Ramadhan Bagus from class MetNum - 03
+
Hello my name is Ramadhan Bagus (2206100306)
 +
== Hydrogen Tank Design and Optimization Project ==
  
== Building Hydrogen Tanks ==
 
  
 
+
'''Specification:'''
Specification:
 
 
   1. Hydrogen Tanks volume is approximately 1 liter.
 
   1. Hydrogen Tanks volume is approximately 1 liter.
 
   2. Hydrogen is compressed to 8 bar.
 
   2. Hydrogen is compressed to 8 bar.
Line 11: Line 10:
 
   4. Maximum budget is Rp500.000
 
   4. Maximum budget is Rp500.000
  
Material Selection:
+
'''Material Selection'''
   Common materials used for hydrogen tanks include high-strength steel, carbon fiber reinforced polymers (CFRP), and composite materials.
+
   SS-304 material by looking at the ASME II D table, a yield strength is 30,000 psi, based by calculations using ASME VIII, this material withstand a pressure of 32 bar, this tube is sufficient to withstand a pressure of 8 bar.
 +
 
 +
'''Design'''
 +
  Based on ASME VIII Div 1, we get
 +
  Joint efficiency (E) = 0,85
 +
  MAWS (SS-304 Seamless Pipe) = 30000 psi
 +
  OD = 3,94 inch = 100.76 mm
 +
  Outside radius (r) = 50.038 mm
 +
  Corrossion Allowance (CA) = 0,01 inch = 0.254 mm
 +
  Thickness (ta) = 0,05 inch = 1.27 mm
 +
  Thickness (t) = (ta-CA) = 0,04 inch = 1.016 mm
 +
 
 +
  Find Diameter and Height
 +
  In this case we know that Volume of Tanks is V = πr^2h, so we know that V = 1L or 0,001 m^3 and OD 10cm (0.1 m)
 +
  0.001 m^3 = 3.14 x 0.05^2 x h
 +
  h = 0.13 m = 13 cm, so height of the tanks is 13 cm
 +
  [[File:Tank130.PNG]]
  
Manufacturing Process:
+
'''Manufacturing Process'''
 
   Prepare the chosen materials in accordance with the design specifications.
 
   Prepare the chosen materials in accordance with the design specifications.
   If using metal, the manufacturing process may involve cutting, forming, and welding the steel plates.
+
   Manufacturing process may involve cutting, forming, and welding the steel plates.
 +
 
 +
'''Quality Assurance and Testing'''
 +
  Hydrogen storage systems are subject to specific regulations and standards, depending on jurisdiction and application. Ensure compliance with applicable codes, regulations and industry standards, such as those set by the American Society of Mechanical Engineers (ASME) or the International Organization for Standardization (ISO).
  
Quality Assurance and Testing:
+
'''Total Cost'''
   Perform quality checks throughout the manufacturing process to ensure the tank meets design specifications.
+
   In the online shop we get price of SS - 304 size 100x400 with thickness 1.2 is Rp120.000, and add estimated cost in machining and labour Rp200.000. So total cost is approx Rp320.000
  Conduct various non-destructive testing methods, such as X-ray and ultrasound, to identify any defects or weaknesses.
 
  
Surface Treatment:
+
'''Coding'''
  Apply appropriate coatings or treatments to enhance the tank's resistance to corrosion and improve durability.
 
 
 
Installation of Valves and Fittings:
 
  Integrate valves, pressure relief devices, and other necessary fittings onto the tank.
 
  Ensure proper sealing and connections to maintain safety and prevent leaks.
 
  Pressure Testing:
 
  
Subject the completed tank to rigorous pressure testing to verify its strength and integrity.
+
  import numpy as np
   Typically, hydrostatic or pneumatic testing methods are employed to evaluate the tank's ability to contain hydrogen gas under pressure.
+
  import matplotlib.pyplot as plt
   Certification and Compliance:
+
  def function(x):
 +
    """
 +
    Contoh Fungsi Persamaan yang didapat dari metode numerik optimasi tangki.
 +
    Args:
 +
        x (numpy.ndarray): Array nilai x.
 +
    Returns:
 +
        numpy.ndarray: Array nilai fungsi.
 +
    """
 +
    # Mengganti dengan fungsi yang ingin ditinjau
 +
    y = x**2 + np.sin(x)
 +
    return y
 +
  def numerical_method(x_start, x_end, num_points):
 +
    """
 +
    Metode numerik untuk menyelesaikan fungsi.
 +
    Args:
 +
        x_start (float): Nilai x awal.
 +
        x_end (float): Nilai x akhir.
 +
        num_points (int): Jumlah titik yang dihasilkan.
 +
    Returns:
 +
        tuple: Tupel berisi array nilai x dan array nilai fungsi.
 +
    """
 +
    x = np.linspace(x_start, x_end, num_points)
 +
    y = function(x)
 +
    return x, y
 +
  # Input parameter
 +
  x_start = -5.0
 +
  x_end = 5.0
 +
  num_points = 100
 +
  # Menerapkan metode numerik
 +
  x, y = numerical_method(x_start, x_end, num_points)
 +
  # Menampilkan grafik hasil metode numerik
 +
   plt.plot(x, y)
 +
  plt.xlabel('x')
 +
  plt.ylabel('f(x)')
 +
  plt.title('Optimasi Tangki')
 +
  plt.grid(True)
 +
   plt.show()
  
Seek certification from relevant regulatory bodies to ensure the tank meets safety standards and legal requirements.
+
[[File:Coding130.PNG]]
  Compliance may involve adherence to codes such as ASME Section VIII or ISO 11439.
 
  
Installation and Integration:
+
'''Link Video Youtube'''[https://www.youtube.com/watch?v=x9A6dinUHyc]
  Install the hydrogen tank into the intended system or vehicle, considering appropriate mounting, anchoring, and connection methods.
 
  Ensure proper integration with associated components, such as hydrogen fuel cells or fueling systems.
 

Latest revision as of 23:53, 11 June 2023

Hello my name is Ramadhan Bagus (2206100306)

Hydrogen Tank Design and Optimization Project

Specification:

  1. Hydrogen Tanks volume is approximately 1 liter.
  2. Hydrogen is compressed to 8 bar.
  3. Normal operating condition (room temperature and humidity).
  4. Maximum budget is Rp500.000

Material Selection

  SS-304 material by looking at the ASME II D table, a yield strength is 30,000 psi, based by calculations using ASME VIII, this material withstand a pressure of 32 bar, this tube is sufficient to withstand a pressure of 8 bar.

Design

  Based on ASME VIII Div 1, we get
  Joint efficiency (E) = 0,85
  MAWS (SS-304 Seamless Pipe) = 30000 psi
  OD = 3,94 inch = 100.76 mm
  Outside radius (r) = 50.038 mm
  Corrossion Allowance (CA) = 0,01 inch = 0.254 mm
  Thickness (ta) = 0,05 inch = 1.27 mm
  Thickness (t) = (ta-CA) = 0,04 inch = 1.016 mm
  Find Diameter and Height
  In this case we know that Volume of Tanks is V = πr^2h, so we know that V = 1L or 0,001 m^3 and OD 10cm (0.1 m)
  0.001 m^3 = 3.14 x 0.05^2 x h
  h = 0.13 m = 13 cm, so height of the tanks is 13 cm
  Tank130.PNG

Manufacturing Process

  Prepare the chosen materials in accordance with the design specifications.
  Manufacturing process may involve cutting, forming, and welding the steel plates.

Quality Assurance and Testing

  Hydrogen storage systems are subject to specific regulations and standards, depending on jurisdiction and application. Ensure compliance with applicable codes, regulations and industry standards, such as those set by the American Society of Mechanical Engineers (ASME) or the International Organization for Standardization (ISO).

Total Cost

  In the online shop we get price of SS - 304 size 100x400 with thickness 1.2 is Rp120.000, and add estimated cost in machining and labour Rp200.000. So total cost is approx Rp320.000

Coding

  import numpy as np
  import matplotlib.pyplot as plt
  def function(x):
   """
   Contoh Fungsi Persamaan yang didapat dari metode numerik optimasi tangki.
   Args:
       x (numpy.ndarray): Array nilai x.
   Returns:
       numpy.ndarray: Array nilai fungsi.
   """
   # Mengganti dengan fungsi yang ingin ditinjau
   y = x**2 + np.sin(x)
   return y
  def numerical_method(x_start, x_end, num_points):
   """
   Metode numerik untuk menyelesaikan fungsi.
   Args:
       x_start (float): Nilai x awal.
       x_end (float): Nilai x akhir.
       num_points (int): Jumlah titik yang dihasilkan.
   Returns:
       tuple: Tupel berisi array nilai x dan array nilai fungsi.
   """
   x = np.linspace(x_start, x_end, num_points)
   y = function(x)
   return x, y
  # Input parameter
  x_start = -5.0
  x_end = 5.0
  num_points = 100
  # Menerapkan metode numerik
  x, y = numerical_method(x_start, x_end, num_points)
  # Menampilkan grafik hasil metode numerik
  plt.plot(x, y)
  plt.xlabel('x')
  plt.ylabel('f(x)')
  plt.title('Optimasi Tangki')
  plt.grid(True)
  plt.show()

Coding130.PNG

Link Video Youtube[1]