Faza Abiyya Rinaldi Haryadi

Introduction

Saya Faza saya cinta metnum

Pertemuan 26/05/2023

Pada pertemuan pertama ini saya dapat memahami bahwa metode numerik merupakan suatu metode penyelesaian dimana untuk menyelesaikan suatu masalah menggunakan pendekatan pendekatan. Kesadaran diri dan pemikiran yang terbuka memainkan peran penting dalam kehidupan kita. Pak DAI menjelaskan sekilas tentang penugasan kepada mahasiswa untuk mendesain tabung hydrogen 8 bar dengan batasan berupa produksi dari tabung tersebut harus kurang dari Rp500.000 . tugas ini diberikan karena mengingat energy hydrogen ini di masa depan diharapkan bisa menjadi solusi

Design & Optimization of Pressurized Hydrogen Storage

Objective : Design and Optimization Of Pressurized Hydrogen Storage

Spesification :

Capacity  : 1 Litres

Pressure Level  : 8 bar

Limitation : Cost should not exceed Rp.500.000

Week 1 progress Designing a hydrogen system requires careful consideration to ensure both safety and efficiency. If you are using Google to learn about the steps involved in creating a hydrogen system, here are the key steps typically followed: Determine the Capacity and Size:

Decide how much hydrogen you want to store in the tank. This capacity will affect the size and dimensions of the tank. Also, consider the energy requirements that the hydrogen will provide. In this case, the tank has to be 1-Liter Sized.

Select Tank Material

Hydrogen tanks are typically made from materials that are strong and capable of withstanding high pressures. Common materials used include alloy steel or carbon fiber reinforced with epoxy resin. Make sure the selected material has sufficient resistance to hydrogen corrosion.

Determine Working Pressure

Hydrogen can be stored in tanks either in compressed form or as a liquid. For compression storage, determine the working pressure based on your application needs. Higher working pressures require tanks with thicker and stronger walls.

Design Tank Structure

Hydrogen tanks usually have a cylindrical design with end caps. In the design, consider structural strength, tank mass, and thermal performance to avoid leaks or structural failures.

Consider Safety Systems

Safety is a critical aspect of hydrogen tank design. Ensure that the tank is equipped with pressure relief valves, and other necessary safety features to reduce the risk of hazards or accidents.

Cost Optimization

Minimize costs by considering factors such as material selection, manufacturing processes, and economies of scale because in this case the maximum cost to spend is Rp 500.000. Explore different manufacturing techniques, such as filament winding or automated fiber placement, to optimize production costs.

Test and Validation

Once the design is complete, conduct testing and validation to ensure the tank meets the required standards and safety regulations. Pressure tests, leak tests, and strength tests are some examples of tests that can be performed.