Fourth Class Meeting - Timothy Felix Vickary

From ccitonlinewiki
Jump to: navigation, search

RESUME

Try to learn what structure software is, because in mechanical engineering it includes building loads that also lead to the determination of the size of the pipe, the cooling load and others. The theorem is generated from axioms and then becomes a proposition, this is already happening because we adhere to something exact mathematics, with mathematics can solve or prove a problem. The first approach used is a continuous concept, the object is considered to have a continuous nature. From there developed mathematical modeling. Up to the stokes navier equation, a mathematical equation for predicting fluid movements based on momentun and mass conservation laws. Just like software, if we say that objects have a rigid body that has particles interacting with each other continuously. We have to wonder about what software, what input and what output. We are not learning formulas, but how to use formulas. Economics is not used, because it uses minimum effort to get a big profit.


ASSIGNMENT

Introduction

SAP2000 software is a structural analysis program which is worldwide used. We can analyse the behaviour of particular object contain structure which material, loads, systemic structure can be assigned as we desired. SAP2000 helps us view mathematically the characteristic of object which has been imposed and the feasibility or might be the additional support to enhance and improve the safety of the structure. By using this software, we could learn how software help in saving significant amount of time from calculation in order to have a better reconstruction or redesign even new development on the model.

Objective

Students have the ability to predict and measure the probable model of housing structure to be built.

Method

First, we need to assign the grid lines.

4-1.png

Then we will have the object shown below.

4-2.png

Second, we need to establish our desired either length, wide, or height of the grid.

4-3.png

Shown below the result of modification of the grid lines.

4-4.png

Third we should assign the materials to be inserted later.

4-5.png

We set steel ASTM A500 just for instance

4-6.png

Below shown the property of material. Future assignment, we could assign the real material close to what Indonesian standard provides.

4-7.png

Fourth, we click the frame section submenu to have determine which shape of structure we are going to have.

4-8.png
4-9.png
4-10.png
4-11.png
4-12.png
4-13.png
4-14.png

Fifth, by doing some frame drawing we could get the actual column or structure of our model.

4-15.png

Sixth, we need to set the load imposed on the structure.

4-16.png
4-17.png

Various loads could be assigned, below shown live dead quake and wind.

4-18.png
4-19.png

Loads that we had already set, could also be combined

4-20.png
4-21.png
4-22.png

Seventh, we set the loads we already mention to the structure as distributed loads.

4-23.png
4-24.png
4-25.png

As structure remain unwavering on the ground we set the restraint of its foundation.

4-26.png
4-27.png

Lastly, we could run the whole analysis of the load of the structure.

4-28.png
4-29.png
4-30.png
4-31.png
Result
4-32.png
4-33.png


Conclusion
By having a trial on SAP2000 we have the rough idea how to utilize the advancement of a software to improve design and construction from engineer with ideal approach.